How do you light this heater?
Posted by Elite Deals - Chris M. on 24 October 2013 03:28 PM

Our Answer:

This unit has a standing pilot that must be lit like most gas water heaters or furnaces. You will need to access the gas valve on the heater and switch the control knob to pilot. You will then need to use a match or lighter to light the pilot while pushing the pilot knob in on the gas valve. Once a flame is present, the pilot knob will need to be held for 1 minute to establish a good flame. The knob will then be released and the unit can be switched on. You will only need to do this at the beginning of the heating season. The pilot will remain lit throughout the season and can be shut down when the unit will not be needed during warmer weather.

(0 vote(s))
Not helpful