Knowledgebase
What is the finish of the outside of this model? It looks brownish in this picture. I am interested in finding an outdoor wood burning fireplace for a covered lanai. I want the depth to be around 26in . The cut out area right now is 42 wide by 41 high.
Posted by Elite Deals - Chris M. on 24 October 2013 03:29 PM

Our Answer:

Unfortunately, this photo does not give the best representation of the finish on this unit. It is actually a brushed stainless finish, as are most outdoor models. This is necessary to prevent corrosion. This unit would require a 53" by 53" framing area for installation. You may want to consider this model: Monessen Al Fresco Stainless Steel Outdoor Wood-Burning Fireplace - 42 Inch The framing dimensions would allow for less modification. Both of these units would need to have an overall height of 6' 4" from the base of the unit to the top of the chimney. Components that are needed for the chimney will depend on how you are passing the chimney through the roof.

In Response to Question:

What is the finish of the outside of this model? It looks brownish in this picture. I am interested in finding an outdoor wood burning fireplace for a covered lanai. I want the depth to be around 26in . The cut out area right now is 42 wide by 41 high. However I can go bigger as this is just the cutout and I have more room as the frame is larger. Also, what info do I need to give you for the vent pipe?

(0 vote(s))
Helpful
Not helpful